PDA

View Full Version : 48 Coupe Floor Board Repair



ST2DE5
02-26-2007, 08:12 PM
http://i152.photobucket.com/albums/s197/wagon56/48Coupe-1.jpg

The first one is when I brought it home, The drivers side floorboars was so rusted out you had to rest you foot on the frame

Randy_G
02-26-2007, 08:14 PM
looks great!, wanna come over do some patch welding on this old Lark I know about.;)

Randy_G
South Bend or Bust 2007!
God I miss chrome on cars.
www.AutomotiveHistoryOnline.com
http://www.automotivehistoryonline.com/sedan4small.jpg

Randy_G
02-26-2007, 08:14 PM
looks great!, wanna come over do some patch welding on this old Lark I know about.;)

Randy_G
South Bend or Bust 2007!
God I miss chrome on cars.
www.AutomotiveHistoryOnline.com
http://www.automotivehistoryonline.com/sedan4small.jpg

3rdGenStude
02-27-2007, 12:17 PM
quote:Originally posted by ST2DE5

The first one is when I brought it home, The drivers side floorboars was so rusted out you had to rest you foot on the frame

Is that a Classic Enterprises panel? My '50 isn't quite that bad, but it's definitely more than I can succesfully make a patch panel for by myself. I was concerned that the CE panels might not be wide enough, but it looks like your panel goes all the way to the tunnel. That area is nice and solid on mine.

Paul

Paul

1950 Land Cruiser project

3rdGenStude
02-27-2007, 12:17 PM
quote:Originally posted by ST2DE5

The first one is when I brought it home, The drivers side floorboars was so rusted out you had to rest you foot on the frame

Is that a Classic Enterprises panel? My '50 isn't quite that bad, but it's definitely more than I can succesfully make a patch panel for by myself. I was concerned that the CE panels might not be wide enough, but it looks like your panel goes all the way to the tunnel. That area is nice and solid on mine.

Paul

Paul

1950 Land Cruiser project

ST2DE5
02-27-2007, 01:02 PM
Yes it is a CE panel but you still have to do some bending. There is a lot more to puting one in than just welding it in. There is a lot of alignment involved. I went ahead and put one in on the other side.

ST2DE5
02-27-2007, 01:02 PM
Yes it is a CE panel but you still have to do some bending. There is a lot more to puting one in than just welding it in. There is a lot of alignment involved. I went ahead and put one in on the other side.