Anybody have M5 parts? I need a brake pedal, also brake pedal shaft, bearing and rod that goes to master cylinder, if possible. Sure would appreciate any leads. Thanks.
-
-
If you can't find the 672593 shaft, here's a drawing. I had one made for my M5 at a local machine shop. I also put some bronze bushings in the pedal arms because they had been worn oversize.
[img=left]http://www.studegarage.com/images/indy/gary_indycar25_vvsm.jpg[/img=left] Gary Ash
Dartmouth, Mass.
'32 Indy car replica (in progress)
'48 M5
'65 Wagonaire Commander
'63 Wagonaire Standard
web site at http://www.studegarage.comGary Ash
Dartmouth, Mass.
'32 Indy car replica (in progress)
’41 Commander Land Cruiser
'48 M5
'65 Wagonaire Commander
'63 Wagonaire Standard
web site at http://www.studegarage.com -
Thanks, Gary. It good to have the drawing in case I need to have one made. Hopefully I can find one for less.
DanComment
-
I have a complete pedal assy except for the rod from the brake pedal to the master. (The rod is probably around here someplace but I couldn't find it this morning). Includes both pedals, shaft, chassis mount and brace, and the master cylinder. I have no idea what its worth so make me an offer. It is in good shape with minor wear in the pedals from 80,000 miles of use.
Jeff Jones
Tucson Arizona
1947 M-5Comment
-
I found the brake rod, so have everything you need. Also have a few other misc. parts.
Jeff Jones
Tucson Arizona
1947 M-5Comment
Comment