Looking for rear axle parts

[00RACER]

The items I need are for the 44 axle housing.I need 1560657-19 spline standard axle-case assembly-TT-for 3.90-4.89 or lower gears-or just the case without the guts.
---or---1560446 same as above except for flanged axles with finer spline- and again the assembly or the case without the guts
THANKS
PAUL LAUSCH

[buddymander]

I have a complete 1957 3.90 TT that I'm going to ebay soon and am wondering; does the 3.90 and lower ring gear take a different carrier that the higher ratios, like 3.54?

[00RACER]

YES, THE ONE CARRIER IS FROM 3.07 THRU 3.73 AND THE OTHER CARRIER IS FOR 3.90 AND LOWER GEARS(I.E. HIGHER NUMERICAL GEARS)
PAUL LAUSCH

[StudeRich]

TT Carriers are NSS, "not sold separately" Paul.

StudeRich

[00RACER]

Yes, Studerich-I do realize that but you do run into circumstances where guys have taken some things apart and have these parts
THANKS
PAUL

[DEEPNHOCK]

You might try a 4wd shop.
Lot's of Dana44 diff's out there in Jeeps and Blazers.
A good one should have a lot of 'outside the norm' parts.