NOS TRUNK MOULDING

[00RACER]

I am looking for NOS #1360965 trunk moulding used on 64-65-66 Lark models. If not NOS ,I will consider excellent used.
THANKS
PAUL LAUSCH

[StudeRich]

Paul; without looking it up I think you mean the Center Moulding on the the protruding "point" of the '64-'65 Deck lid? The one that is always smashed! [xx(]


StudeRich

[Skip Lackie]

They are very tough to find. Good luck!

Skip Lackie
Washington DC

[Roscomacaw]

Why, this sounds like a call for Matthew's Metal Magic!!! Slip on your cape, Matthew! To the rescue!!!!![:0]

1957 Transtar 1/2ton
1963 Cruiser
1960 Larkvertible V8
1958 Provincial wagon
1953 Commander coupe
1957 President two door

[2R5]

Good luck ooracer , I've been looking for a few years with no luck




[IMG]
Home of the Fried Green Tomato
"IF YOU WANT THE SMILES YOU NEED TO DO THE MILES "

1960 Champ
1964 Daytona HT

[Orestudeguy]

Hey Paul,

While they are tough to find, I did find one just last year complete in it's original wrapper.
They are out there just be patient. I just about gave up when I got this one.
I'll ask around for you.

George
Grants Pass, Oregon
64 Station Wagon with fixed roof (Canadian Car)

64 Wagonaire sliding roof South Bend car.

63 GT Hawk

51 Champion Starlight Coupe

[41 Frank]

If this is the ribbed piece about 6" or 8" wide, I bought up a half dozen or so at SASCO last month. They have more, but they don't have a part number on them so it remains to be seen if they can find them.I don't have any immediate recollection where I found them in the building.

Frank van Doorn
1962 GT Hawk 4 speed
1963 Daytona Conv
1941 Champion R-2 Rod

[N8N]

frank, if you're thinking of the same part I am that's for a '63, but they only have one side.

nate

--
55 Commander Starlight

http://members.cox.net/njnagel

[41 Frank]

Nate I know what you are saying. I have a 63 Daytona,those pieces you are talking about fit on the trunk panel underneath the lid. This piece I am talking about fits on the trunk lid itself and in the middle has a hole for the lock, it is aluminum, not pot metal.It is ribbed and has kind of a v-shape to conform to the rear part of the 64 trunk lid. Used on 64 Y and other models.

quote:Originally posted by N8N

frank, if you're thinking of the same part I am that's for a '63, but they only have one side.

nate

--
55 Commander Starlight

http://members.cox.net/njnagel

Frank van Doorn
1962 GT Hawk 4 speed
1963 Daytona Conv
1941 Champion R-2 Rod

[studefan]

Frank, the piece you have is for the Cruiser. The Daytona has three separate thin strips running horizontally. The center strip is about 1/2 inch wide and is impossible to find in good condition.

[Swifster]

If not available, have your original moulding repaired. Many places will do this for under $100 bucks (or so I've been quoted). Lots of companies advertise for this in Hemmings.

---------------------------------------------------------------------------------------------------
Tom - Mulberry, FL

1964 Studebaker Daytona - 289 4V, 4-Speed (Cost To Date: $2125.60)

1964 Studebaker Commander 170-1V, 3-speed w/OD (Cost to Date: $623.67)

[Lark Parker]

quote:Originally posted by Swifster

If not available, have your original moulding repaired. Many places will do this for under $100 bucks (or so I've been quoted). Lots of companies advertise for this in Hemmings.

---------------------------------------------------------------------------------------------------
Tom - Mulberry, FL

Good grief I was doing those for $40.
LP

[41 Frank]

Thanks Jeff.Could not remember for sure.

quote:Originally posted by studefan

Frank, the piece you have is for the Cruiser. The Daytona has three separate thin strips running horizontally. The center strip is about 1/2 inch wide and is impossible to find in good condition.

[monomaniac]

Yes, Frank, the pieces you have are for the trunk lid of
1964 ONLY
Cruiser ONLY
no other models or years

[barnlark]

Originally posted by Swifster

If not available, have your original moulding repaired. Many places will do this for under $100 bucks (or so I've been quoted). Lots of companies advertise for this in Hemmings.

Originally posted by Lark Parker
Good grief I was doing those for $40.
LP

That's because you're a kind, caring SDC soul. [^]