Announcement

Collapse
No announcement yet.

59 Lark V8 Auto Trans Mounts needed.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 59 Lark V8 Auto Trans Mounts needed.

    Anyone have a pair of tranny mounts for a 59 Lark V8 Automatic. These are the style that mount on each side of the bellhousing. I'm trying to finish this converter replacement and this is the last piece of the puzzle. The ones in the car are either dissolved, or sheared in half.

    sals54
    sals54

  • #2
    The tranny mounts were the same for many years. repro mounts are available at any of the typical vendors....
    There is a left/right... so you will need a pair.


    Ray


    Specializing in Studebaker Restoration
    Ray

    www.raylinrestoration.com
    Specializing in Studebaker Restoration

    Comment


    • #3
      Holy Moly, so they're not interchangeable side to side????

      sals54
      sals54

      Comment


      • #4
        quote:Originally posted by sals54

        Holy Moly, so they're not interchangeable side to side????

        sals54
        Nope.. Flightomatics use:
        1544970, 1544971...



        Ray


        Specializing in Studebaker Restoration
        Ray

        www.raylinrestoration.com
        Specializing in Studebaker Restoration

        Comment


        • #5
          And the driver's side spacer...

          Comment


          • #6
            Sho' enough: P/N 1544970-1 available from SI for about $64.75 a pair(2007 price).
            quote:Originally posted by Studeman

            The tranny mounts were the same for many years. repro mounts are available at any of the typical vendors....
            There is a left/right... so you will need a pair.


            Ray


            Specializing in Studebaker Restoration

            Comment


            • #7
              And the ones for the Avanti's are different. The mounting holes are located higher. Jim

              Comment


              • #8
                quote:Originally posted by Studeman

                Nope.. Flightomatics use:
                1544970, 1544971...Ray
                quote:Originally posted by DieselJim

                And the ones for the Avanti's are different. The mounting holes are located higher.
                Jim
                Sal needs the Lark Rear Engine Mounts: 1547202, 203
                Also for '56-'57 Hawk

                The 1544970 & 971 ARE for Avanti, also '58-'64 Hawk.

                Some members are experienced in Body Work, some in Mechanical work and others are parts Specialists, it's OK to not know it all!


                StudeRich at Studebakers Northwest -Ferndale,WA
                StudeRich
                Second Generation Stude Driver,
                Proud '54 Starliner Owner
                SDC Member Since 1967

                Comment


                • #9
                  StudeRich, That's fer sher. The only Stude thing I'm an expert on is my own car. I only work on these others on an as needed basis. I'm just trying to do a lady a favor to get her car running. I'll call SASCO tomorrow, I suppose. Thanks all.

                  sals54
                  sals54

                  Comment


                  • #10
                    Sal, I'm not a "specialist" either, but I have a chassis parts book like everyone else since my parts number memory lasts maybe 30 seconds. As I mentioned above, don't forget p/n# 532427 on the driver's side for that '59. Hopefully it's still there with the "dissolved" one. Nice of you to offer help to a stranded '59 owner. I only have one pair as my spares, or I'd send them to you to help out.

                    Comment

                    Working...
                    X