Announcement

Collapse
No announcement yet.

Need some Windshield Wiper parts for my 53

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need some Windshield Wiper parts for my 53

    I am looking for connecting links and drivers for Vacuum wipers for a 53 Champion as shown in figure 25 on page 9 of the shop manual. I have an aftermarket vacuum to electric conversion motor and it is expecting the linkage used with the vacuum system versus the linkage for electric that I have. I could do some welding on the linkage I have and make it work, but thought it would be easier to use what the motor was designed for. Let me know what you have, and what you want for it.

    Edit
    Found items in Studebaker International catalog. I only need the left one. Terminology is left driver and connecting arm. Part number is 303841 for the left. It is for 53-58 Coupe or hardtop(K) with vacuum wipers. Somebody must have one laying around or in a parts car.

    thanks

    Pat

    Pat Dilling
    Olivehurst, CA
    Custom '53 Starlight aka Stu Cool

    LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611
    Pat Dilling
    Olivehurst, CA
    Custom '53 Starlight aka STU COOL


    LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611

  • #2
    Need to be more specific about the parts or have some numbers. Not sure of where Olivehurst is either. I have a set out of a 53K.

    Comment


    • #3
      I need the links/arms that go from the vacuum motor out to the pivoting posts and also the pivoting posts(drivers) themselves that go through the cowl that the wiper blades ride on. The links are riveted to the posts if they are like the ones for the electric set up.

      Olivehurst is about 40 Miles North of Sacramento near Marysville and Yuba City.

      Thanks for responding, hope what you have is what I need

      Pat

      Pat Dilling
      Olivehurst, CA
      Custom '53 Starlight aka Stu Cool

      LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611
      Pat Dilling
      Olivehurst, CA
      Custom '53 Starlight aka STU COOL


      LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611

      Comment


      • #4
        All the stuff I have is the electrical, unless they have the same parts? Will take a look at my parts books.

        Comment


        • #5
          The linkage for the vacuum motor is different. I have the electric, need the vacuum.

          thanks

          Pat

          Pat Dilling
          Olivehurst, CA
          Custom '53 Starlight aka Stu Cool

          LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611
          Pat Dilling
          Olivehurst, CA
          Custom '53 Starlight aka STU COOL


          LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611

          Comment

          Working...
          X