I am hoping to find a 1941 studebaker trunk lid, does anyone have one in reasonably good shape?
Studebakers forever!
Studebakers forever!
-
Studebakers forever! -
I think we have one in terrible rusty shape, but maybe not bent up, if you have none, as you know a good one is IMPOSSIBLE to find!
StudeRichquote:Originally posted by studelover
I am hoping to find a 1941 studebaker trunk lid, does anyone have one in reasonably good shape?Studebakers forever!
Studebakers Northwest
Ferndale, WAStudeRich
Second Generation Stude Driver,
Proud '54 Starliner Owner
SDC Member Since 1967 -
how much do you want for it?
Studebakers forever!Studebakers forever!Comment
-
I would have to find out how to tell the exact year and body style: business coupe vs Coupe or 2 dr. probably need the length, because I know nothing about old Studes. never had one, mine are all NEW Studes.!
1954 to 1965!
Shipping is also a pretty big issue as it is up here in Washington State. All I know is it's one of those long narrow decklids with the moulding down the center that had the really long lazy "S". So I don't want to price it unless I know it will fit.
StudeRichquote:Originally posted by studelover
how much do you want for it? Studebakers forever!
Studebakers Northwest
Ferndale, WAStudeRich
Second Generation Stude Driver,
Proud '54 Starliner Owner
SDC Member Since 1967Comment
-
If a correct lid can be found and someone in the vicinity doesn't mind hauling it to Lancaster and Studelover can pick it up there, shipping issues are resolved.Brad Johnson,
SDC since 1975, ASC since 1990
Pine Grove Mills, Pa.
'33 Rockne 10, '51 Commander Starlight. '53 Commander Starlight
'56 Sky Hawk in processComment
-
this coupe has a rear seat. I would welcome anyone who has one to contact me, I would appriciate it[8D]
Studebakers forever!Studebakers forever!Comment
-
42 and 46 should work also. Just trim is different.
Klif
55 Speedster
55 Speedster/Street Machine
63 Avanti R2
64 Convertible R1Comment
-
The one on my 41 2 door Champion is 36 1/2" from top to bottom measured in the middle. About 39" across the top.
Frank van Doorn
1962 GT Hawk 4 speed
1963 Daytona Conv
1941 Champion R-2 RodFrank van Doorn
Omaha, Ne.
1962 GT Hawk 289 4 speed
1941 Champion streetrod, R-2 Powered, GM 200-4R trans.
1952 V-8 232 Commander State "Starliner" hardtop ODComment
-
Frank, are the bus.coupe trunk lids different in size than the reg coupe.
Studebakers forever!Studebakers forever!Comment
-
Wish I knew Rodney, that is what hotwheels63r2 is trying to figure out.We need some prewar gurus to help out here.
quote:Originally posted by studelover
Frank, are the bus.coupe trunk lids different in size than the reg coupe.
Studebakers forever!Frank van Doorn
Omaha, Ne.
1962 GT Hawk 289 4 speed
1941 Champion streetrod, R-2 Powered, GM 200-4R trans.
1952 V-8 232 Commander State "Starliner" hardtop ODComment
-
The parts book does not differentiate between the business coupe and the double dater. We are talking coupe not 2 door?
Klif
55 Speedster
55 Speedster/Street Machine
63 Avanti R2
64 Convertible R1Comment
-
I gave Mike the measurements of my 2 door trunklid so he could figure out what lid he had Klif.In other words if it was one for a coupe.
quote:Originally posted by klifton1
The parts book does not differentiate between the business coupe and the double dater. We are talking coupe not 2 door?
Klif
55 Speedster
Frank van Doorn
Omaha, Ne.
1962 GT Hawk 289 4 speed
1941 Champion streetrod, R-2 Powered, GM 200-4R trans.
1952 V-8 232 Commander State "Starliner" hardtop ODComment
-
I got the measurements of the trunk lid on the coupe we have here they are as follows: from the center top- to- bottom 53 inches from side to side measuring at the bottom of the lasy S accross is 33 inches.
Studebakers forever!Studebakers forever!Comment
-
This is an old blog. But my friend made a mold for mine, he can make more if need be. I have a 41 and 42 Champian Coupe , they are the same. I think 40 is a lot the same. Maybe we can help. Ted gasserted@yahoo.comComment
Comment