Belond Studebaker headers

[Flashback]

I am sitting here waiting on a phone call to let me know when I can go look at the Marshal, and looking at old magazines. I ran across at least three ads for Belond headers for V/8 Stude. Anybody ever hear of these or see any?

Tex in Alabama
53 C coupe

Tex E. Grier

[Mike Van Veghten]

Nope.
Nor that name at all. But then, I'm sheltered on the West Coast.

Mike

[Mike Van Veghten]

Nope.
Nor that name at all. But then, I'm sheltered on the West Coast.

Mike

[PackardV8]

Belond was a big name in the '50s. Their Stude headers I have seen are very small tubes, designed for the 232". They rusted quickly and don't offer any performance increase on larger engines. I am in the process of cleaning up a set just now. Will post some photos after they are sandblasted and coated. They will look trick on a retro-'53.

thnx, jack vines

PackardV8

[PackardV8]

Belond was a big name in the '50s. Their Stude headers I have seen are very small tubes, designed for the 232". They rusted quickly and don't offer any performance increase on larger engines. I am in the process of cleaning up a set just now. Will post some photos after they are sandblasted and coated. They will look trick on a retro-'53.

thnx, jack vines

PackardV8

[Flashback]

JACK"S BACK --I just knew some of you "old" guys would know about these. I can't wait yo see your pictures. Thanks Jack!!!!!!!!!!!!

Tex in Alabama
53 C Coupe

Tex E. Grier

[Flashback]

JACK"S BACK --I just knew some of you "old" guys would know about these. I can't wait yo see your pictures. Thanks Jack!!!!!!!!!!!!

Tex in Alabama
53 C Coupe

Tex E. Grier

[Dwain G.]

Sandy Belond's So. Cal. Muffler Co. made the Equa-Flow exhaust systems.
Now if you want RARE headers, look at these, also from the early fifties:
________________________________

______________________________


Dwain G.

[Dwain G.]

Sandy Belond's So. Cal. Muffler Co. made the Equa-Flow exhaust systems.
Now if you want RARE headers, look at these, also from the early fifties:
________________________________

______________________________


Dwain G.

[Flashback]

So Right. Have you ever seen or had any? Thank you for the response. I want a set for my Flashback 53.

Tex in Alabama
53 C Coupe

Tex E. Grier

[Flashback]

So Right. Have you ever seen or had any? Thank you for the response. I want a set for my Flashback 53.

Tex in Alabama
53 C Coupe

Tex E. Grier

[Chris Pile]

Sweetnesh!

Chris Pile
StudeFolk Manager

http://tiny.cc/RYqAK

[Chris Pile]

Sweetnesh!

Chris Pile
StudeFolk Manager

http://tiny.cc/RYqAK

[Jerry Forrester]

quote:Originally posted by Dwain G.

Sandy Belond's So. Cal. Muffler Co. made the Equa-Flow exhaust systems.
Now if you want RARE headers, look at these, also from the early fifties:
Dwain G.

I have never cared for headers on a street car unless they were Cast iron. ala R3, Ford 390 HiPo, 406, 427 etc. I'm an FE engine man.
That said, at $46 per pair, send me two sets.

Jerry Forrester
Douglasville, Georgia
Be sure to check out my eBay store
http://stores.ebay.com/CHROME-CHROME-CHROME_ and my EZ33 store http://tinyurl.com/2g2j88
for your shiny Stude stuff


More pix of Leo the '55 Pres HT here...http://tinyurl.com/2gj6cu

[Jerry Forrester]

quote:Originally posted by Dwain G.

Sandy Belond's So. Cal. Muffler Co. made the Equa-Flow exhaust systems.
Now if you want RARE headers, look at these, also from the early fifties:
Dwain G.

I have never cared for headers on a street car unless they were Cast iron. ala R3, Ford 390 HiPo, 406, 427 etc. I'm an FE engine man.
That said, at $46 per pair, send me two sets.

Jerry Forrester
Douglasville, Georgia
Be sure to check out my eBay store
http://stores.ebay.com/CHROME-CHROME-CHROME_ and my EZ33 store http://tinyurl.com/2g2j88
for your shiny Stude stuff


More pix of Leo the '55 Pres HT here...http://tinyurl.com/2gj6cu