PDA

View Full Version : looking for 9'' rear brake drum's for 6 cyl lark??



dannyo
10-16-2017, 06:22 AM
hub & drum ,59 to 64 ,new or used< that are in good cond,. that can be turned or allready turned , ask for them all the time ,any one know ,or have some , SI dont have them or other supplier's i have heard of ,any help would be great .

Bo Markham
10-16-2017, 10:47 AM
new or used< that are in good cond,. that can be turned or allready turned , ask for them all the time ,any one know ,or have some , SI dont have them or other supplier's i have heard of ,any help would be great .

What year and model Lark? There are different numbers for different year and models, plus Type A and B.

StudeRich
10-16-2017, 02:57 PM
Obviously ANY 9 Inch Studebaker rear Drum with 5 Lugs, for tapered axles, is going to work.
But if you are not into installing your Hub into a "Drum Only" THAT might be a problem.

lelshaddai
10-16-2017, 11:38 PM
I have a rear axle from a 54 Champion. It has 9" brakes. Will these work? 5 lug.

StudeRich
10-17-2017, 01:26 AM
If it is complete with the Hub installed it will save a lot of frustration trying to figure out how to
R & R a Hub.

Yes, a complete used Hub and Drum Assembly, not more than .060 oversize when machined or usable as is, from a '54 Champion will work fine on a '59 to '64 6 Cyl.

dannyo
10-17-2017, 07:00 AM
Hi all, need the hub & drum for 59 to 64 , the shoes are 2 1/4 '' the older cars are only 2'' , this is what i need .

TX Rebel
10-17-2017, 08:47 AM
Hi all, need the hub & drum for 59 to 64 , the shoes are 2 1/4 '' the older cars are only 2'' , this is what i need .

I have an internal flange hub & drum ass'y for $90.

www.studebakersite.com