I have the pan off of what I think is a 62 GT 289 4spd
Every thing I have read says the engine should be black but have a lot of red orange paint bleeding through every where.
Engine no P90092 heads I555294
The engine has been out because rear main .020 underground.
The bore is roughly 3.365 which would be .060 over according to an old motor manual I have.
Second question I know I am not good a math but when I plug in pi rd squared times Stroke times
8 I do not get 289 cdi using 3.5625 bore and 3.625 stroke.are my old numbers wrong ?