Results 1 to 6 of 6

Thread: '56 President

  1. #1
    Commander Member
    Join Date
    Jul 2011
    Location
    Manchaca, Tx
    Posts
    60

    '56 President

    All you folks here have been most helpful with my '56 President restoration.
    I recall that the '57 Champion rear window is an exchange for the '56 President rear window.
    Is that correct?
    Are the front Windshields also exchangable?
    I can get parts from the Champion.

    Real question now is that I do not have rear lights. I am attaching a picture of the light switch. I have looked at the wiring diagram but it doesn't help me much.
    Left front is red
    right front is green
    rear is black
    second from the front left and right terminals have nothing connected and there lies the problem...I think.
    There is a loose yellow and black wire with a black wire that terminates in a barrel connector. I tried this to each terminal but nothing. There is also a wire that looks as if it melted the isulation off and connects to nothing. I haven't a clue about it.

    I ran a secondary wire from the second left terminal to the rear and the lights come on at the parking light position but go off when I turn the head lights on.
    Does this make sense?

    I am asking what should be connected to the empty terminals.

    thanks for the assistance.

    Steven
    Attached Images Attached Images

  2. #2
    President Member
    Join Date
    Jul 2006
    Location
    Sand Springs,, Oklahoma, USA.
    Posts
    2,689
    Where are you located? I have a pair of NOS tail light housings and lenses for sale.
    7G-Q1 49 2R12 10G-F5 56B-D4 56B-F2
    http://ozarktrails.tripod.com/
    SDC Member 1985

  3. #3
    President Member
    Join Date
    Mar 2005
    Location
    Puget Sound, , USA.
    Posts
    2,821
    Took me 2 or 3 looks at your pic before I realized this is not a Studebaker switch. It's a universal switch, possibly a Dorman #85989. See a pic of it here:
    http://www.dormanproducts.com/p-18677-85989.aspx
    These are readily available at most auto parts stores. I don't think there are any markings on these switches, but I would hope new ones come with a wiring diagram. Perhaps a friendly parts store will check that and let you copy it.
    A wiring diagram for your car and photo of a '56 sedan headlight switch can be found on Chuck Collins site:
    http://www.studebakerparts.com/
    [SIGPIC][/SIGPIC]

  4. #4
    Commander Member
    Join Date
    Jul 2011
    Location
    Manchaca, Tx
    Posts
    60

    '56 President lights

    Quote Originally Posted by ST2DE5 View Post
    Where are you located? I have a pair of NOS tail light housings and lenses for sale.
    I live a few miles outside Austin, Tx.
    How much for the lights?

  5. #5
    Commander Member
    Join Date
    Jul 2011
    Location
    Manchaca, Tx
    Posts
    60
    thanks for the information. It does look like the Dorman switch. I will be off to find a wiring diagram for the switch today.
    thanks again.

  6. #6
    President Member
    Join Date
    Jul 2006
    Location
    Sand Springs,, Oklahoma, USA.
    Posts
    2,689
    PM sent..................
    7G-Q1 49 2R12 10G-F5 56B-D4 56B-F2
    http://ozarktrails.tripod.com/
    SDC Member 1985

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •