I recent installed a new 4bbl edelbrock (1406) carb on a factory 4bbl manifold on my 1960 lark 259 and I am having a problem with it flooding , it may be getting to hot too
I can hear the gas bubbling in the carb after it gets hot , I installed an electric fuel pump at the tank with a pressure regulator and its running about 5 psi at idle
My question is should I block off the heat riser since this carb has an electric choke
I also have a 59 lark with a 62/63 289 in it with the exact same carb that runs great so thats why I choose this carb for my 1960
I am going to ask Edelbrock too and see if they have and suggestions too
I can hear the gas bubbling in the carb after it gets hot , I installed an electric fuel pump at the tank with a pressure regulator and its running about 5 psi at idle
My question is should I block off the heat riser since this carb has an electric choke
I also have a 59 lark with a 62/63 289 in it with the exact same carb that runs great so thats why I choose this carb for my 1960
I am going to ask Edelbrock too and see if they have and suggestions too
Comment