Announcement

Collapse
No announcement yet.

Ignition Switch......

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ignition Switch......

    I'd like a backup for my 64 GT Hawk....are they still available?....what would interchange?....any ideas?
    Lou Van Anne
    62 Champ
    64 R2 GT Hawk
    79 Avanti II

  • #2
    Nothing interchanges because of the provisions for the "Special" Studebaker only, "Bezel".

    New Reproductions are available and you sometimes can find an actual NOS or good Used, Made in USA, Aetna or Aetna-Pollack, Original, OEM, Switch at Studebaker Swap Meets.

    You can remove your Lock Cyl. if you have the Key, and install in whatever Switch you use.

    Aftermarket Chrysler clones are available also, but they have an ugly Knurl Nut that shows, and will ruin the Fiberglass dash, IMHO, only usable on a "beater", driver condition, non-collectible Model.

    Click image for larger version

Name:	59LarkRegal4drHawiian Green8.jpg
Views:	2
Size:	111.7 KB
ID:	1720760 A Beautiful '59 Lark Regal, but it has an Aftermarket Switch installed upside down by one of the "Unknowing".
    Last edited by StudeRich; 05-20-2018, 05:25 PM.
    StudeRich
    Second Generation Stude Driver,
    Proud '54 Starliner Owner
    SDC Member Since 1967

    Comment


    • #3
      Studebaker International has some options.

      Comment


      • #4
        Originally posted by Xcalibur View Post
        Studebaker International has some options.
        So does Stephen Allen.
        Joe Roberts
        '61 R1 Champ
        '65 Cruiser
        Eastern North Carolina Chapter

        Comment


        • #5
          Thanks folks.....always lots of help here.
          Lou Van Anne
          62 Champ
          64 R2 GT Hawk
          79 Avanti II

          Comment

          Working...
          X