Results 1 to 18 of 18

Thread: New-to-Me 1958 3E7 Transtar 1/2 ton long bed

  1. #1
    Commander Member capwombat's Avatar
    Join Date
    Nov 2012
    Location
    Manassas, VA
    Posts
    63

    New-to-Me 1958 3E7 Transtar 1/2 ton long bed

    Hello & Merry Christmas/Happy Holidays to everyone on the Forum. Many of you will likely be familiar with this truck as it's come up for sale on several occasions over the last 18 months or so. But last weekend I finally pulled the trigger and bought it, and could not be more delighted with the truck. All photo credits (as well as credit for the quality of the restoration) go to the former owner -- these photos are all from one of his ads. I hope to add a few of my own in the near future, after I get the rear bumper mounted and install the Turner disc brakes and Vintage Air system. The red '59 Silver Hawk will now have something to keep it company in the garage. I am looking forward to taking both vehicles to local shows, with my son (who rode with me across Route 66 in the Silver Hawk in 2011) driving the truck!

    1958-studebaker-pickup-1.jpg1958-studebaker-pickup-2.jpg1958-studebaker-pickup-3.jpg1958-studebaker-pickup-4.jpg1958-studebaker-pickup-5.jpg1958-studebaker-pickup-6.jpg1958-studebaker-pickup-7.jpg1958-studebaker-pickup-8.jpg1958-studebaker-pickup-9.jpg1958-studebaker-pickup-10.jpg

  2. #2

  3. #3

  4. #4
    President Member
    Join Date
    Dec 2007
    Location
    Union, CT., USA.
    Posts
    4,326
    Wow John, super nice looking Truck "I just love the long beds" speaking of beds, did this one survive in such nice straight un dented "floor". or was it re done with C.E. panels ?
    Joseph R. Zeiger

  5. #5
    Commander Member capwombat's Avatar
    Join Date
    Nov 2012
    Location
    Manassas, VA
    Posts
    63
    Joe, according to the previous owner (who did the cosmetic restoration of the pristine "patina'ed" original), it has just never really been used as a work truck. It was a suburban vehicle its whole life, and the bed metal is original. I have the photos he took from when he bought it (estate sale) -- it's just a clean, under 75,000 mile original truck. I got lucky!

  6. #6
    President Member
    Join Date
    Dec 2007
    Location
    Union, CT., USA.
    Posts
    4,326
    Lucky for sure John, You'll get much satisfaction with this one !
    Joseph R. Zeiger

  7. #7
    President Member
    Join Date
    Nov 2004
    Location
    , , Canada.
    Posts
    852
    I am assuming it has O/D , that is the icing on the cake.Very nice looking truck by thr way.

  8. #8
    Commander Member capwombat's Avatar
    Join Date
    Nov 2012
    Location
    Manassas, VA
    Posts
    63
    No overdrive, unfortunately. I am looking into a modern 5-speed conversion w/floor shift.

  9. #9
    Speedster Member
    Join Date
    Aug 2016
    Location
    Elko NV
    Posts
    295
    I agree , beautiful truck! Looks like the restoration was done with attention to detail. You should have a lot of fun driving it.

  10. #10
    President Member
    Join Date
    Dec 2007
    Location
    Union, CT., USA.
    Posts
    4,326
    Now that would make driving 5 times more fun

    Quote Originally Posted by capwombat View Post
    No overdrive, unfortunately. I am looking into a modern 5-speed conversion w/floor shift.
    Joseph R. Zeiger

  11. #11
    Commander Member capwombat's Avatar
    Join Date
    Nov 2012
    Location
    Manassas, VA
    Posts
    63
    Got the rear bumper installed today. It's from a Ford Ranger. Fits like it was designed for this truck.
    26733653_212538349306393_3404904258028353626_n.jpg26814452_212538345973060_9203994523299000109_n.jpg26815318_212538342639727_7882660306549977748_n.jpg
    Attached Images Attached Images

  12. #12
    President Member 62champ's Avatar
    Join Date
    Dec 2004
    Location
    Kentucky Bluegrass
    Posts
    2,669
    That looks really good - what did you do for brackets? Photos of said brackets and mounting?

  13. #13
    Commander Member capwombat's Avatar
    Join Date
    Nov 2012
    Location
    Manassas, VA
    Posts
    63
    Here are some photos from today -- got the new Vintique "smoothie" wheels and radial tires mounted. If anyone wants the old/original wheels & tires (including the spare), as shown in the photos, send me a PM. I also have the original front hubs & brake drums available (it now has a Turner disk brake kit up front).
    19642408_214238172469744_8828500330802232127_n.jpg26734321_214238139136414_3266439411720764724_n.jpg26907236_214238135803081_5902562288591880912_n.jpg26992640_214238165803078_6594900633026725674_n.jpg26804944_214238262469735_1987365358380284828_n.jpg26903628_214238215803073_2837540770049794852_n.jpg26907235_214238222469739_6204537820401224916_n.jpg26907799_214238265803068_2749351494287762029_n.jpg

  14. #14
    Silver Hawk Member
    Join Date
    Sep 2005
    Location
    Washington, DC, USA.
    Posts
    5,514
    I might be interested in the wheels/tires. Are they 15" or 16"?

  15. #15
    Commander Member capwombat's Avatar
    Join Date
    Nov 2012
    Location
    Manassas, VA
    Posts
    63
    Quote Originally Posted by 62champ View Post
    That looks really good - what did you do for brackets? Photos of said brackets and mounting?
    Regarding brackets, I used the Ford Ranger ones that came with the bumper kit, plus a piece of angle iron, and welded it into onto the frame. Apologies for the quality of the photos -- I do not have a lift in my garage, so I am laying on my back on a creeper, and can't get a full photo of the entire installation (can't get the iPhone camera far enough away to see everything in the viewfinder). Hopefully this gives you an idea (and yes, I am aware I am not going to win any awards for artistic welding). I need to complete all the welds, cut off the excess angle iron "L" bracket on either side of the frame, and then cover the welds and the bare angle iron up with some Rustoleum or POR15. I'll do that after I decide if I am going to try to add a Class III hitch to the bottom. Right now, I just have a 2" ball mounted to the bumper.

    IMG_0536.jpgIMG_0537.jpgIMG_0538.jpgIMG_0540.jpgIMG_0541.jpgIMG_0544.jpgIMG_0545.jpgIMG_0548.jpgIMG_0549.jpg

    - - - Updated - - -

    The old wheels are 16" in diameter, and narrow.
    Last edited by capwombat; Yesterday at 09:47 PM.

  16. #16
    Commander Member capwombat's Avatar
    Join Date
    Nov 2012
    Location
    Manassas, VA
    Posts
    63
    Based on a PM I received earlier today, the wheels and tires MAY be sold (if they do not sell, I will post an update). Brake parts & hubs are still available, if anyone wants them.

  17. #17
    Commander Member capwombat's Avatar
    Join Date
    Nov 2012
    Location
    Manassas, VA
    Posts
    63
    Just dropped the spare from under the truck (see photos). The wheel was clearly repainted sometime in the last 5 years or so by the previous owner, but as opposed to the larger and much newer old-style (but Made in Mexico) bias ply/tube-type tires that were on the truck before I installed the Vintique wheels and Michelin radials yesterday, the tire on the spare is a much older, made in Indianapolis 5:00 x 16 tire. I cannot believe it is the 1958 original (the rubber seems to be in too good shape/not enough sidewall cracking), but it definitely appears to be a period ('60s, maybe?) tire.

    Anyone w/more expertise than me able to hazard a guess? The markings shown in the photos are the same on both sides of the tire.

    IMG_0553.jpgIMG_0560.jpgIMG_0554.jpgIMG_0555.jpgIMG_0556.jpgIMG_0557.jpgIMG_0558.jpgIMG_0559.jpg

  18. #18
    Speedster Member
    Join Date
    Nov 2012
    Location
    Millington Tn
    Posts
    168
    Just go ahead and put a class 3 hitch on the truck.

    It's better to have one and never use it. Then to need one and not have it.

    Those Ranger bumper brackets are easy to bend downwards. I've done it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •