Results 1 to 3 of 3

Thread: 57 GH Rear Window reveal Clips

  1. #1
    Commander Member
    Join Date
    Oct 2013
    Location
    Wilsonville, Alabama
    Posts
    41

    57 GH Rear Window reveal Clips

    I am missing some of the tubular clips, part number 3032x1, for the 1312531 upper rear window reveal moulding on my 57 Golden Hawk. They fit in the 5/16" holes in the body and grab the 3/16" pins protruding from the moulding. I would like to get 9 of them since the ones I do have are in poor condition. I have tried SI and Stephen Allen's and both have no stock even though they list them on their web sites. If none can be found, does anyone have experience with an alternative?
    Last edited by JoeW; 05-19-2017 at 02:46 PM.

  2. #2
    President Member
    Join Date
    Oct 2004
    Location
    Montpelier, VT, USA.
    Posts
    964
    Joe,

    I couldn't find the Studebaker 3032X1 clips you are looking for, but found an assortment of "universal" Auveco brand clips (probably from the 1960's) which has barrel style clip shown as fitting a 3/16" stud (see photos). It doesn't list the size of the opening the clip fits in. You might want to do a search on-line to see if these are still available or if you want to give these a try send me a PM.

    IMG_0749.JPG

    IMG_0750.JPG
    Dan Peterson
    Montpelier, VT
    1960 Lark V-8 Convertible
    1960 Lark V-8 Convertible (parts car)

  3. #3
    Commander Member
    Join Date
    Oct 2013
    Location
    Wilsonville, Alabama
    Posts
    41
    Dan,

    Thanks for the help. I did find the assortment on line and ordered it. The 3/16"clips look the same as the 3032x1 clips. If they are designed for a smaller hole I may be able to use the 1/4" clips and put a sleeve on the 3/16" stud on the moulding. If they work I will update this post so others will know a solution.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •