View RSS Feed


  1. Studebaker Power Steering Control Valve - how to

    Quote Originally Posted by bezhawk View Post
    The replacement seals damage very easily . The best way to install them is to have the valve out and install one end,the steel washer, then slide the valve through the middle. Push the valve through as far as you can without pushing the new seal out of the bore, and install the other new seal on the opposite end of the valve.
    By doing this there is no poking or trying to push the seal and possibly damaging the outside sealing lip.
    If your hoses are good, you don't have to disassemble
    Tags: it worked! Add / Edit Tags