Announcement
Collapse
No announcement yet.
Molding availability
Collapse
X
-
The molding part number is 1360955. The hard top may use the same molding but with out holes for the snaps. The 60 convertibles did. When I did the 60 I had, That's what I used on it. Studebaker Int. had them.
Klif55 Speedster/Street Machine
63 Avanti R2
64 Convertible R1
-
For your 64' ragtop you need 3 pieces; 2 pot metal & 1 stainless. The 2 pot metal pieces are shared with the hardtop, for only 63-64' models and are among the henny of the hen's toothed Studebaker parts. The U-shaped rear, stainless, piece is used for raggies only, and may be different year to year. That piece for your 64' was easy to be had up til a few years ago-now tough(er).
Comment
-
Originally posted by jackb View PostFor your 64' ragtop you need 3 pieces; 2 pot metal & 1 stainless. The 2 pot metal pieces are shared with the hardtop, for only 63-64' models and are among the henny of the hen's toothed Studebaker parts. The U-shaped rear, stainless, piece is used for raggies only, and may be different year to year. That piece for your 64' was easy to be had up til a few years ago-now tough(er).Skip Lackie
Comment
Comment