Announcement

Collapse
No announcement yet.

Dash electrical schematic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dash electrical schematic

    I am going tomorrow to my 1961 hawk, to try and start matching up the wires that lead to the different gauges in the dash. If I remember correctly I thought I saw a schematic in our shop manual. The writing is so small I can't see it. My question, is there somewhere on the net a schematic that is blown up well enough that I may see and read colors? This is pretty scary to me as I have install mamny dashes however the stude hawk has just a few gauges but many wires running everywhere each switch has three wires going to it. All my cables where left in place so it's just the "wires" I am concerned about[]thanks.

    Studebakers forever!
    Studebakers forever!

  • #2
    If all else fails scan the diagram You have and make it larger.

    1961 Hawk 4BC,4-SPEED,TT

    Lewisville,NC
    1961 Hawk ...4-Speed;4bc;Twin Traction

    Ken Byrd
    Lewisville,NC

    Comment


    • #3
      Do you have your shop manual on CD? If so, you can go to the schematic page and "zoom" by increasing (e.g. from 100% to 200% etc).

      Las Vegas, NV
      '51 Champion Business Coupe G899965 10G-Q4-1434

      Comment


      • #4
        I went to Chuck Collins' Studebaker Online, he has all the wiring diagrams and got this: https://www.studebakerparts.com/stud...61-v8-wire.jpg . Save it, then open it with a photo editor and zoom till you can see it.
        Hope this helps.

        Tim K.
        '64 R2 GT Hawk
        Tim K.
        \'64 R2 GT Hawk

        Comment


        • #5
          Great idea Tim thanks

          Studebakers forever!
          Studebakers forever!

          Comment

          Working...
          X