Went to install my newly refurbished arm rests for my '62 wagon. Funny, the mounting screws are different for the wagons vs. sedans....go figure....
-
-
How are they different ?Joseph R. Zeiger -
2 door cars have a different length from those on 4 doors & wagons.59 Lark wagon, now V-8, H.D. auto!
60 Lark convertible V-8 auto
61 Champ 1/2 ton 4 speed
62 Champ 3/4 ton 5 speed o/drive
62 Champ 3/4 ton auto
62 Daytona convertible V-8 4 speed & 62 Cruiser, auto.
63 G.T. Hawk R-2,4 speed
63 Avanti (2) R-1 auto
64 Zip Van
66 Daytona Sport Sedan(327)V-8 4 speed
66 Cruiser V-8 autoComment
-
62-64
fronts on sedans/wagon = 12 x 24's
rears on wagons 10 x 32'sComment
-
One other comment regarding these armrest screws. The threaded inserts in the door are exposed to atmosphere and moisture. Just like chasing threads anytime you remove bolts in an engine...it is good to run a tap through the armrest threads. It cleans them of rust and makes it much less likely you'll bind and cross-thread on installation.John Clary
Greer, SC
SDC member since 1975Comment
Comment