PDA

View Full Version : HELP finding a '53-'54 Automatic Brake Pedal base?



StudeRich
09-20-2014, 08:37 PM
OK, I almost NEVER ask for anyone's help here, but a Local Chapter Member and sometimes forum Member came to me for some Brake Parts and one item I just do not have is an Automatic Trans. Steel Brake Pedal base for all '53-'54's.

He has the shafts and the Rubber Pad, but the Pedal Base 532247 that connects the old Standard Trans. Clutch Shaft to the brake Pedal Shaft on '54 and '54 Automatics is missing.

There has to be several of you out there who removed all this stuff years ago to mount a firewall Master Cylinder or to change to a Standard Trans. and no longer need the WIDE Automatic Pedal.

I'll buy this, or you can sell it directly to him, if you will please sell it.

StudeRich
09-21-2014, 02:43 PM
BUMP! OK, this Post is falling down the page faster than Meteorite, has anyone had a chance to look yet?

41 Frank
09-21-2014, 05:03 PM
Yeah I looked but do not have it Rich.

63t-cab
09-21-2014, 09:33 PM
Chances are some/most said ah and discarded those parts as they had no use for them :(

Alan
09-21-2014, 09:55 PM
Only had one Stude with an automatic and my father sold that while I was over seas in 1969.

studegary
09-21-2014, 10:05 PM
Sorry, but not a part that I saved from any car.
It may not be too hard to make up something that would work. It is not seen once the pad is on.

8E45E
09-21-2014, 10:07 PM
I would not be at all surprised if SI has one or two kicking around.

Craig

TX Rebel
09-22-2014, 12:30 AM
I have one for $20.

StudeRich
09-22-2014, 02:34 PM
Barry, thanks so much for locating one I'll have Kenny give you a PM to pay you and ship it to him.

drrotor
09-23-2014, 01:42 AM
Barry- PM sent.

warrlaw1
09-23-2014, 09:42 AM
You can also try Paul Revell (55s). I will be replacing my auto with a T10 when I retire the car from "stock' to go cruising. Three years down the road.