PDA

View Full Version : Grant S/wheel adapter SOLD



Flashback
07-06-2014, 03:43 PM
I have sold two other kits (one with wheel), and was saving one, cause they were are so hard to come by. I am probably never gonna use it. I also have a new steel adapter (just adapter not kit) I am gonna dig back out. Here's a couple of pics of the kit. It has the turn signal cam on it too. It's $100.00 to your door. I know it fit's 53-55 and probably other
http://i307.photobucket.com/albums/nn320/Flashback53/grantsteeringwheeladapter53steeringwheel002_zpsc10e5c1f.jpg (http://s307.photobucket.com/user/Flashback53/media/grantsteeringwheeladapter53steeringwheel002_zpsc10e5c1f.jpg.html)

Here ya go LEE ,

http://i307.photobucket.com/albums/nn320/Flashback53/grantsteeringwheeladapter53steeringwheel001_zps20f94bd9.jpg (http://s307.photobucket.com/user/Flashback53/media/grantsteeringwheeladapter53steeringwheel001_zps20f94bd9.jpg.html)

Flashback
08-05-2014, 12:32 PM
Bring this up for YOU to view Lee.

SN-60
08-05-2014, 01:51 PM
Rare Bird!

showbizkid
08-06-2014, 09:59 AM
That's interesting. I have a Grant wheel on my car which I'm planning to take off, mostly because the cancel cam is not there. I wonder if the cam from another kit can be adapted?

SN-60
08-06-2014, 10:04 AM
That's interesting. I have a Grant wheel on my car which I'm planning to take off, mostly because the cancel cam is not there. I wonder if the cam from another kit can be adapted?

I would think that a canceling cam (like the one shown in Flashback's 2nd picture in post#1) could be fashioned from flat metal stock. (might be easier said than done though!)

Flashback
08-06-2014, 01:03 PM
I would think that a canceling cam (like the one shown in Flashback's 2nd picture in post#1) could be fashioned from flat metal stock. (might be easier said than done though!)

It can be done , Real easy, The one in the photo is actually a cam off a Studebaker wheel. Just use good flat snap ring pliers and remove from Stude wheel. Slide back on adapter. Caution: Don't slide on too far ( take measurement) and use Loctite . simple

showbizkid
08-07-2014, 10:21 AM
I thought the canceller on Stude wheels was the round clinch ring with the downward-facing leg. This one looks more like curved sheet metal?