Electrical: Junction block at Front of Radiator

[Mike Sal]

I'm trying to pull the front end off my '55 President sedan so I can rebuild the suspension & change the grill & front fender skins. When pulling the wires from the 5 post junction block on the radiator shroud, one of the nuts stuck on the stud & a ceramic insulator block broke. I'll use a dremel to cut the nut off so I can finish getting the wires off.

Are these junction blocks still available?

Mike Sal

[Studebakercenteroforegon]

519186 Five terminal junction block is available from Studebaker International.

[Mike Sal]

Thanks for the info. I'll have to start making that shopping list for Southbend next month.

Holy cow that '55 front end is a monster. There's enough metal in the front air dam (below & behind the bumper) to build a toyota.....

Am discovering the right fender is not as good as I originally hoped. I've got a NOS left fender, but only pieces of another right in order to patch the right fender......
Mike Sal