PDA

View Full Version : emblems



chivas1559
03-11-2012, 10:40 PM
Does anyone know were can I fiine the letter K for the trunk of my 64 studebaker daytona ? thanks

(S)
03-11-2012, 10:44 PM
Did you want a new one or a used one, and welcome to the forum!

BobPalma
03-11-2012, 10:46 PM
Sure. Studebaker International, current catalog, Page 49. BP

chivas1559
03-11-2012, 10:51 PM
I want a used one thanks.

HAWK64
03-11-2012, 11:14 PM
Does anyone know were can I fiine the leyyer K for the trunk of my 64 studebaker daytona ? thanks

If you get stuck, I have a NOS K letter still in original packaging - part number 1343233W.

cultural infidel
03-11-2012, 11:21 PM
new ones from SI are about $10 if I recall correctly

kmac530
03-11-2012, 11:36 PM
No help to the Hawk "K" need here, but welcome to the forum billy goat.
{for those espaniol challenged, Chivas is a goat and Cesar is a guys name...so Billy Goat}

Roscomacaw
03-12-2012, 10:50 AM
I've got two kinds - one's uniformly thick and the other's thickest at it's bottom. I can't remember whicxh one's which. Maybe the '64 version is thickest at the top? Anyone know?

2R5
03-12-2012, 10:52 AM
The one for the Lark type is about the same both ends I think

BobPalma
03-12-2012, 12:00 PM
I've got two kinds - one's uniformly thick and the other's thickest at it's bottom. I can't remember whicxh one's which. Maybe the '64 version is thickest at the top? Anyone know?


Bob: 1962 and 1963 versions are thicker at the bottom due to the angle of the deck lid area on which they were mounted, so the actual front of each letter is more-or-less perpendicular to the ground when mounted on the deck lid.

1963 station wagons and all 1964s and 1965s are the same as 1961 on back. BP

Roscomacaw
03-12-2012, 01:05 PM
I understood why they're thicker on one end or the other (or uniform in thickness, for that matter) - I just couldn't recall which one the '64s used. I was thinking that since the prominent protrusion of the aftmost point on a '64's decklid slants both ways on either side of the center moulding, that might determine which letter style was employed thereupon. I've got used Ks of the two sorts I mentioned if the seeker still wants one. He can either pick it up or provide me with a mailing address.

chivas1559
03-13-2012, 03:32 PM
Roscomacaw

how much are u tryin to sell them for?
n my adress is
4625 E. Weldon Ave Fresno Ca
93703
thank you
give me a reply plz

Roscomacaw
03-13-2012, 04:00 PM
I'd send you one for the price of postage..

chivas1559
03-13-2012, 04:36 PM
how much would that be?

Roscomacaw
03-13-2012, 07:18 PM
5 bucks would take it by Priority Mail - cheaper than driving the 100-mile round trip!

chivas1559
03-13-2012, 09:37 PM
ok Roscomacaw thanks where ca I send you the money? tanks again.

Roscomacaw
03-13-2012, 11:29 PM
At th4e top ofr this page, check under "Notifications". I sent you my mailing address in a private4 message.

Anne F. Goodman
03-14-2012, 02:10 PM
Chivas1955 Hello and welcome to the Forum. I just thought that I would introduce myself I am the President of the San Joaquin Valley Chapter of the Studebaker Drivers Club. WE meet the second Tuesday at Yosemite Falls on Blackstone north of Shaw at 5:30 for dinner 6:30pm for our monthly meeting. You can find my information in the local chapters page from the main SDC website page. Call me for more information. Also pictures of your Lark would be great. I typed all this last night but it just disappeared.

Roscomacaw
03-14-2012, 02:21 PM
Anne,

Maybe YOU can help out Cesar with this K letter? Would save him postage AND intro him to your chapter.

Anne F. Goodman
03-14-2012, 02:53 PM
So far I don't think that I have a K letter. I'll have to check around.