PDA

View Full Version : Wiring a stop light switch on 66 Cruiser



lstude
06-02-2007, 06:10 AM
One of our club members posed this question to me. I am not great at wiring. Can anyone help him?

Lenny,
I am in the process of making my 66 Cruiser road-worthy. My daughter told me when I was backing down the driveway that my brake lights weren't working. I checked under the hood and noticed that the two wires going to the brake light switch were missing and I can't find "hide nor hair" of them anywhere under the hood (don't know why I never noticed before). I also checked to see if someone had installed a pedal activated switch since the later Larks had a mounting plate on the steering column but there was no trace of that either. Can you tell me where the two wires going to the fluid switch originate. I would appreciate any help that you can provide.
Thanks for your time,
Bruce

Leonard Shepherd
http://leonardshepherd.com/

http://i129.photobucket.com/albums/p235/lstude1/Mein64DaytonaatBradfieldssm2.jpghttp://i129.photobucket.com/albums/p235/lstude1/52Commanderoutofgarage4-3.jpg

Rerun
06-02-2007, 06:50 AM
I don't know if there is any difference with a '66, but there is an excellent color copy of a '64 wiring diagram at
http://members.cox.net/clarknovak/63-4-lark-wire-COLOR.pdf

There is a red wire from the fuse to the switch, and then a red/white from the switch to the turn signal switch.

Maybe this will help.

Jim Bradley
'64 Daytona HT "Rerun"
http://home.earthlink.net/~bradley71771/images/Rerun.jpg