PDA

View Full Version : How does this piece attach?



valleyguy
05-31-2007, 01:39 PM
Having removed the fins and rear fenders, bumpers etc.
on my 58 Hawk over a year ago,
I somehow lost track of how this one particular
piece (1604-13 on diagram) attachs:
the manual says it is a "filler" between the rear fender and
bumper... I have these two pieces, (one for each side) and they
have a curvature on
one side similar to the curve of the back of the fender, but its not obvious (to me) where they attach. Bopefully someone has a Hawk and has done this before. ?? Tks
http://usera.imagecave.com/jadiggle/image002.gif

41 Frank
05-31-2007, 01:49 PM
They attach like the illustration shows, they screw on in the indented part of the rear fender and act as a filler beween the bumper ends and fender as you indicated.I can't think of a better way to explain it.

Frank van Doorn
1962 GT Hawk 4 speed
1963 Daytona Conv
1941 Champion R-2 Rod

tyaughton
06-01-2007, 01:11 AM
and it's the one pair of items that I forgot to give to the painter. I found them buried in a box a week after the car came back from the paint shop. Wouldn't have cared much, except the car is now stock desert sand instead of butter yellow.

At least there's some spare paint still in the can.

j

valleyguy
06-01-2007, 01:14 PM
Alright, thanks, I'll get those things on. Guess I
didn't do too bad... just having two
mystery pieces left over after all I had off the car....

Joe D.

Guido
06-01-2007, 04:26 PM
Just like rebuilding an air cooled VW motor, I always seemed to have 1 or 2 extra sheet metal screws left over.

http://thumb14.webshots.net/t/53/453/1/21/36/2964121360097493054pVJTFL_th.jpghttp://thumb14.webshots.net/t/57/757/2/88/4/2023288040097493054SEKowB_th.jpghttp://thumb14.webshots.net/t/18/19/8/37/21/2050837210097493054IYBJJL_th.jpghttp://thumb14.webshots.net/t/59/559/1/43/57/2876143570097493054jKVhDw_th.jpghttp://thumb14.webshots.net/t/22/22/0/2/68/2589002680097493054ftBuBw_th.jpghttp://thumb14.webshots.net/t/28/28/8/30/30/2075830300097493054aSSlFv_th.jpghttp://thumb14.webshots.net/t/59/459/2/23/86/2067223860097493054YoeGMx_th.jpghttp://thumb14.webshots.net/t/28/28/5/18/33/2537518330097493054OgEKcN_th.jpg
Guido Salvage - "Where rust is beautiful"

Studebaker horse drawn doctor’s buggy; Studebaker horse drawn “Izzer” buggy; 1946 M-16 fire truck; 1948 M-16 grain truck; 1949 2R17A fire truck; 1950 2R5 pickup; 1952 2R17A grain truck; 1952 Packard 200 4 door; 1955 E-38 grain truck; 1957 3E-40 flatbed; 1961 6E-28 grain truck; 1962 7E-13D 4x4 rack truck; 1962 7E-7 Champ pickup; 1962 GT Hawk 4 speed; 1963 8E-28 flatbed; 1964 Avanti R2 4 speed; 1964 Cruiser and various other "treasures" (including a 1959 IH B-120 4 wheel drive).

Hiding and preserving Studebakers in Richmond, Goochland & Louisa, Va.

JDP
06-01-2007, 04:43 PM
The front pieces are chrome on Golden Hawks at least.

JDP/Maryland


63 GT R2
63 Avanti R1
63 Daytona convert
63 Lark 2 door
62 Lark 2 door
60 Lark HT-60Hawk
59 3E truck
58 Starlight
52 & 53 Starliner
51 Commander