PDA

View Full Version : Cast iron studebaker header



studelover
05-20-2007, 02:09 PM
Does anyone have a picture of a 289 studebaker header? Someone has a pair however I don't know what it would look like, don't want to get stuck.[8D]

Studebakers forever!

Mike Van Veghten
05-20-2007, 06:17 PM
Visually...they sorta look like Chevy Rams horn manifold.
The two end ports come out and bend toward the center...then roll down.
The center port goes out and over the end ports and down...making the "down" leg kinda square or rectangular in shape. If you look inside from the exit up, the end ports come together, then the center and end ports come together about 2-1/2"/3" from the exit.

Hope that helps some. If no one else posts any pictures...I'll tey to take some later.

Mike

sbca96
05-20-2007, 07:41 PM
I was looking at one that Lionel Stone had (at the time he didnt have
a set in stock) and they are pretty neat. I would like a set for my
Avanti eventually. Of course .. just back on the road would be nice.

Tom

'63 Avanti, zinc plated drilled & slotted 03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, soon: 97 Z28 T-56 6-spd, Ported heads w/SST full flow valves, 'R3' 276 cam, Edelbrock AFB Carb, GM HEI distributor, 8.8mm plug wires

lstude
05-20-2007, 07:50 PM
There is a picture on the Studebaker International web site.

http://www.studebaker-intl.com/pages/801092.htm



Leonard Shepherd
http://leonardshepherd.com/

http://i129.photobucket.com/albums/p235/lstude1/Mein64DaytonaatBradfieldssm.jpghttp://i129.photobucket.com/albums/p235/lstude1/52Commanderoutofgarage4-2.jpg

sbca96
05-20-2007, 08:38 PM
http://www.studebaker-intl.com/images/801092.jpg

Tom

Karl
05-20-2007, 08:49 PM
These are not just a bolt on. they will need a little massaging to remove casting flash.;)

63 Twin Supercharged Avanti
64 Avanti R3w/NOS
88LSC Avanti 350 Supercharged w/NOS

Mike Van Veghten
05-20-2007, 08:52 PM
Karl -

A LITTLE massaging........?
I spent well over an hour on each manifold. To clean up the interior divider...to make the actual outlet a nice clean "round" outlet and of course to match them to my heads.

Mike

Alan
05-20-2007, 11:48 PM
Only an hour Mike? Either you got a nice set or you are getting lazy in your old age.

studelover
05-20-2007, 11:58 PM
quote:Originally posted by lstude

There is a picture on the Studebaker International web site.

http://www.studebaker-intl.com/pages/801092.htm



Leonard Shepherd
http://leonardshepherd.com/

http://i129.photobucket.com/albums/p235/lstude1/Mein64DaytonaatBradfieldssm.jpghttp://i129.photobucket.com/albums/p235/lstude1/52Commanderoutofgarage4-2.jpg
thanks you,you saved me some big money , the guy was cheating me, the headers he has are not for my studebaker thank you!

Studebakers forever!

Karl
05-21-2007, 01:34 AM
The time used releaves stress.Mike you must work like the six million dollar man. To do them in an hour.lol

63 Twin Supercharged Avanti
64 Avanti R3w/NOS
88LSC Avanti 350 Supercharged w/NOS