PDA

View Full Version : Dual chamber master cylinder



52-fan
05-14-2007, 09:52 PM
I have just purchased a 1962 Daytona that is in need of a brake overhaul after sitting for some 14 years. While I am at it I would like to change over to a dual type master cylinder that is compatible with the drum type brakes. Does anyone out there have a specific recommendation for a firewall mounted master cylinder in this car?

!952 Champion Starlight since October,1971. !962 Daytona
since May, 2007.

JDP
05-14-2007, 09:59 PM
1970's AMC's with drum brakes.

JDP/Maryland


63 GT R2
63 Avanti R1
63 Daytona convert-63
63 Lark 2 door
62 Lark 2 door
60 Lark HT-60Hawk
59 3E truck
58 Starlight
52 & 53 Starliner
51 Commander

52-fan
05-15-2007, 08:12 PM
Thanks to 55PREZ I got the link to the Bob Johnstone Avanti site that I had lost a while back. After reading the brake info in it I decided to try a master cylinder listed for a 1971 Dodge Coronet with non disc brakes. It has a 4 bolt flange and a 1 1/32" bore. Has anyone had experience with a similar set-up? Please remember this is for drum brakes.

!952 Champion Starlight since October,1971. !962 Daytona
since May, 2007.