PDA

View Full Version : Fan blade to radiator clearance



curt
05-14-2007, 11:14 AM
I have a 1955 President. Is 3/4 of an inch enough clearance between the fan blade tip (at the closest point) and the radiator? I have a thinner shim . The thinner shim puts the blade 1/8 of an inch from the pulley. PO has a three belt capicity pulley on the crank shaft. I suspect he was thinking of adding an air conditioner, but he died. Any thoughts?

JDP
05-14-2007, 11:39 AM
More then enough.

JDP/Maryland


63 GT R2
63 Avanti R1
63 Daytona convert-63
63 Lark 2 door
62 Lark 2 door
60 Lark HT-60Hawk
59 3E truck
58 Starlight
52 & 53 Starliner
51 Commander