PDA

View Full Version : Help with adj. ft. fenders & hood, please.



50starlite
05-05-2007, 10:27 AM
We will be painting my 50 Starlight Champion late this month or early next and we will need to adjust both front fenders before starting. Both outside rear corners rub the fenders when closing the hood. This is not something we want to happen after a fresh paint. I have done a topic search and have found no help. The hood seems to be where it belongs, itís the fenders that need the back corners moved out. Iíve got a good painter but I expect he will have a hard time solving this problem. Iím just trying to get a heads-up for him.

I donít know how good the pics show the problem, itís as good a shot as I could get. Also both upper trunk corners sit too low in their opening.

Suggestions???

Thanks
Dick
Mountain Home, AR
http://livingintheozarks.com/studebaker.htm

http://i131.photobucket.com/albums/p312/50starlite/Lfender.jpg

http://i131.photobucket.com/albums/p312/50starlite/Lfront.jpg

http://i131.photobucket.com/albums/p312/50starlite/leftfrt.jpg
http://i131.photobucket.com/albums/p312/50starlite/Trunk.jpg

studegary
05-05-2007, 02:25 PM
From what I can see in the pictures, it looks like both your hood and trunk are too low. On the nose, align the hood to the cowl and then align the fenders to the hood and cowl.

Gary L.
Wappinger, NY

1959 DeLuxe pickup (restomod)

studeclunker
05-05-2007, 02:38 PM
I'm far from any kind of an expert. That said; the pictures look like your hood and fender brackets are out of adjustment. It's possible to adjust the front and rear alignment of both 'doors'. Time consuming, frustrating even, but possible. Your body man should be able to handle this problem with ease.

http://i16.photobucket.com/albums/b18/Studeclunker/december%2006/HPIM0234.jpg http://i16.photobucket.com/albums/b18/Studeclunker/56%20Parkview%20Wagon/56wagonleftfrontclipped-1.jpg
Home of the famous Mr. Ed!
Lotsa Larks!
K.I.S.S. Keep It Simple Studebaker!
Ron Smith
Where the heck is Lewiston, CA?

whacker
05-05-2007, 02:59 PM
As Studegary says, first align the hood to the cowl, then the hood to the front. Only after these are right do you align the fenders to the cowl and hood.

lstude
05-05-2007, 08:54 PM
On my 52 Commander, the bolt hole spaces are big enough to move the fenders out on each side. Mine are just temporarily on, but I did try the hood and it seems that the fenders need to be on the far edge of the bolt hole space. There are also shims that go between the fender and the frame on the front part of the fender by the radiator.

http://i99.photobucket.com/albums/l288/lstude/52Commanderfendertocowlbolts002.jpg


Leonard Shepherd, editor, The Commanding Leader, Central Virginia Chapter, http://centralvirginiachapter.org/
http://i99.photobucket.com/albums/l288/lstude/Mein64Daytonasm.jpghttp://i99.photobucket.com/albums/l288/lstude/52inyardsm-1.jpg

Roscomacaw
05-06-2007, 12:58 PM
At the factory - the bodies came to be fitted to the chassis with the hoods already fitted to the cowl of the body. Once the body was bolted to the chassis, the front clip was installed and ALIGNED to the HOOD.:D

Miscreant adrift in
the BerStuda Triangle
http://images.andale.com/f2/115/106/906179/2006/12/7/truckonhill3.jpg

1957 Transtar 1/2ton
1960 Larkvertible V8
1958 Provincial wagon
1953 Commander coupe