PDA

View Full Version : 59-64 Shop Manual



studecruiser
03-27-2007, 06:42 AM
In my shop manual, in the engine section, there is no information on the 289. Is this info on the 289 missing or just not available. If anyone knows where I can get this info I would greatly appresicate it. Thanks in advance.

ivorydan
03-27-2007, 10:14 AM
My shop manual is a 62 to 64 Shop Manual. It covers the 259-289 v8s together in the fifth section of Group III. The jet thrust v8 is listed separately in the sixth section of Group III.

StudeRich
03-28-2007, 02:19 AM
There are no engine procedures that I can think of that differ between the 259 & 289. Only the specs like: stroke and cubic inches are different because the only 2 parts that are different, are Crankshaft and Pistons.

StudeRich
Studebakers Northwest
Ferndale, WA

studecruiser
03-28-2007, 08:40 AM
I suspected as much, but was not really sure. Thanks a lot !