PDA

View Full Version : New 2 X 2 Intake



55Commander
04-24-2006, 10:30 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8058974534&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

I did a search but can't find any info on this new intake. Does anyone know anything about it?

Thanks
TZ

JDP
04-24-2006, 11:36 PM
Looks like a new recasting of a 50's design, perhaps from Stu-V or the like.

Studebaker On The Net http://stude.com
64 R2 4 speed Challenger
63 R2 4 speed GT Hawk
63 Avanti
54 3R Pickup

N8N
04-25-2006, 05:27 AM
I was going to guess Weiand...

nate

--
55 Commander Starlight
62 Daytona hardtop
http://home.comcast.net/~njnagel

Dan White
04-25-2006, 06:38 AM
Is this the one that Lionel Stone is repoing? I know he has listed a 2X2 but I have never seen one. It does look like the Weiand design.

Dan White
64 R1 GT
64 R2 GT

DEEPNHOCK
04-25-2006, 07:30 AM
I have bought and prepped a few of these.
Be careful to check them out closely, as the core shift is so bad the boring of the one side of the carb throttle bore breaks through the wall of the other side.
Could cause balance issues on one or two cylinders.
Jeff[8D]



quote:Originally posted by 55Commander

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8058974534&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

I did a search but can't find any info on this new intake. Does anyone know anything about it?

Thanks
TZ

Alan
04-25-2006, 04:06 PM
It looks like one of Stones.

55Commander
05-03-2006, 02:48 PM
The manifold came in last week.
Most of it looks good, although there is some
cleanup required.

I slapped a couple backdraft carbs on it and it looks
pretty good. Now I need to figure out how to
make some screens or aircleaners.

JDP
05-03-2006, 02:52 PM
Watch for the alignment to the heads, some are way off.

Studebaker On The Net http://stude.com
64 Daytona HT
64 R2 4 speed Challenger
63 R2 4 speed GT Black
63 R2 4 speed GT White
63 GT Hawk
63 Avanti
62 Daytona HT
53 Coupe

imported_n/a
05-05-2006, 05:09 PM
There was a complete 50's Stude engine that had a manifold similar to the one you've pictured listd on EBay a few days ago. Looked like it had been sitting in storage for a very long time.

DEEPNHOCK
05-06-2006, 03:36 PM
How does the RR throttle bore look down deep?




quote:Originally posted by 55Commander

The manifold came in last week.
Most of it looks good, although there is some
cleanup required.

I slapped a couple backdraft carbs on it and it looks
pretty good. Now I need to figure out how to
make some screens or aircleaners.

55Commander
05-08-2006, 11:07 AM
Like it needs some trimming.




quote:Originally posted by DEEPNHOCK

How does the RR throttle bore look down deep?