PDA

View Full Version : hei dist for 6 cyl stude



TTodd
08-09-2005, 09:45 PM
Has any one done this before. I've put them on stovebolt sixes and a few amc sixes and v8 motors. The dist in the old 61 Lark VI I have is wore slam out. The old car is a dayly driver not worth restoring I'm just trying to keep it on the road reliably

thanks Tony

61 Lark
61 Lark Cruser VIII

Transtar60
08-10-2005, 12:34 PM
I had one done by Dave LeVesque years ago. Worked fine.
He has a website
http://www.steeltechsolutions.com/

TTodd
08-10-2005, 07:37 PM
Any idea what they used for a donner

Thanks Tony

61 Lark
61 Lark Cruser VIII

Transtar60
08-10-2005, 07:49 PM
Dont remember, that was about 12-to- 20 years ago.
Call him or email him. He might tell ya.

Dan White
08-10-2005, 08:11 PM
I talked to Dave some time ago and he said he had quit doing the HEI since the Pertronix units were available, much cheaper than he could do the HEI. You might be able to twist his arm but he is supposedly up to his eyeballs in brake kits.

Dan White
64 R1 GT
64 R2 GT

JDP
08-10-2005, 08:29 PM
Dave T-Bow has just finished a custom billet, all electronic performance distributor for the sixes and the V8 is on the way.

Studebaker On The Net http://stude.com
64 R2 4 speed Challenger (Plain Wrapper)
63 R2 4 speed GT Hawk

TTodd
08-11-2005, 04:58 PM
Thanks for the info. I have a 6 cyl hei from a old chevy I think I'll give it a try and see if it might work.

Tony

61 Lark
61 Lark Cruser VIII