PDA

View Full Version : Big Bonneville dealer poster, anyone have one?



Studebaker Wheel
02-13-2010, 08:19 PM
http://i230.photobucket.com/albums/ee285/studeq/newsgroup/DSCF2274.jpg?t=1266109987

Digging around in the attic and found this. Have not had in unrolled since I got in back in the 70's. It is quite large 4' X 7" X 3' 6." Believe I have seen a similar small magazine ad.

Richard Quinn
Editor emeritus: Antique Studebaker Review

Chris_Dresbach
02-13-2010, 08:37 PM
That's really cool! Iv'e never seen one like it.:)

Chris Dresbach
http://i768.photobucket.com/albums/xx323/chris_dresbach/Studebaker%201/ModelN-1-1.jpg
http://i768.photobucket.com/albums/xx323/chris_dresbach/40champion-1-1.jpghttp://i768.photobucket.com/albums/xx323/chris_dresbach/Studebaker%201/N10-1.jpg

Anne F. Goodman
02-13-2010, 10:35 PM
I like the fact that you used Coors Light bottles to hold the corners down.

Mabel 1949 Champion
Hawk 1957 Silverhawk
Gus 1958 Transtar
The Prez 1955 President State
Blu 1957 Golden Hawk
Daisy 1954 Regal Commander Starlight Coupe
Fresno,Ca
http://i122.photobucket.com/albums/o269/nw3anne/Mabel.jpg?t=1165475035http://i122.photobucket.com/albums/o269/nw3anne/xmasannecopy.jpghttp://i122.photobucket.com/albums/o269/nw3anne/GusMater.jpghttp://s122.photobucket.com/albums/o269/nw3anne/th_DSCN17232008-01-01.jpghttp://i122.photobucket.com/albums/o269/nw3anne/54%20Commander%20Regal%20Coupe/3539580552_f5500eb0d8-1-1.jpghttp://i676.photobucket.com/albums/vv124/nw3anne2/DSCN51082009-10-11-1-1.jpg

JDP
02-13-2010, 10:45 PM
quote:Originally posted by JDP

I think I have a couple from ad's in Automotive News, big, but not that size.

JDP/Maryland



JDP/Maryland

sals54
02-14-2010, 12:57 AM
Richard, That is a fabulous poster. Have you considered having copies made? I would be interested in buying one.... if the price is not too prohibitive, that is. CASO to the very end, I guess, eh? Please let us know. Thanks.

sals54
http://i296.photobucket.com/albums/mm197/sals54/NewSignature.jpg

Studebaker Wheel
02-14-2010, 01:21 AM
Yes, I may do that. I believe it would be wise to reduce it since as I have noted it is quite large. Will let you know if and when I get some better images.

Richard Quinn
Editor emeritus: Antique Studebaker Review

Ian Mackellar
02-14-2010, 04:57 AM
Hey Dick,which dimension is 7" ?....I would definitely be interested in some copies. I have seen the center shot in magazines. Full size would be great.

1958 Golden Hawk
1962 GT Hawk
1963 Avanti R2
1963 Avanti Salt Racer
http://i461.photobucket.com/albums/qq337/irmack/58005-1.jpg

Studebaker Wheel
02-14-2010, 05:04 AM
It is 4 feet 7 inches by 3 feet 6 inches. Got an "X" in there by misteak![8D]

Richard Quinn
Editor emeritus: Antique Studebaker Review

Bill Pressler
02-14-2010, 05:25 AM
quote:Originally posted by Studebaker Wheel

It is 4 feet 7 inches by 3 feet 6 inches. Got an "X" in there by misteak![8D]

Richard Quinn
Editor emeritus: Antique Studebaker Review


Richard, my hometown dealer ran that as a newspaper ad in the corner of a page of our trusty old "Record Argus" newspaper.

Bill Pressler
Kent, OH
'63 Lark Daytona Skytop R1 (sold new by Cordell Motors, Moorhead, MN)
'64 Daytona Hardtop (sold new by Carl E. Filer Co., Greenville, PA)


http://i253.photobucket.com/albums/hh48/newshooter44/44320019-3.jpghttp://i253.photobucket.com/albums/hh48/newshooter44/broadway_filer_oct03-1.jpghttp://i253.photobucket.com/albums/hh48/newshooter44/100_0690_00-1_3.jpg

JRoberts
02-14-2010, 07:01 AM
I too would be interested in a small reproduction of that poster. That is a really cool one.

Joe Roberts
'61 R1 Champ
'65 Cruiser
Editor of "The Down Easterner"
Eastern North Carolina Chapter

clonelark
02-14-2010, 07:11 AM
Count me in, Den wall is waiting.

http://i45.tinypic.com/15cnk3b.gif http://i49.tinypic.com/20zsg13.jpg

barnlark
02-14-2010, 10:46 AM
]Originally posted by Studebaker Wheel

It is 4 feet 7 inches by 3 feet 6 inches. Got an "X" in there by misteak![8D]

What a great poster. I'm glad it wasn't 7" thick. ;):D

hi-peral
02-14-2010, 04:31 PM
Richard...I would also be interested in a copy. Whatever size is fine. Al

Live your dreams!

nels
02-15-2010, 08:37 AM
Dick
I would be interested but would want one the original size. I think the size of the picture makes it way more interesting.

Gunslinger
02-15-2010, 09:51 AM
I wouldn't mind having one at all...size is pretty much immaterial.




Poet...Mystic...Soldier of Fortune. As always...self-absorbed, adversarial, cocky and in general a malcontent.

Avantidon
02-15-2010, 11:42 AM
Richard, if you are going to reproduce them, put me on the list. Have seen the full page ad and I have that but the banner would just be icing on the cake!!

Studebaker Wheel
02-16-2010, 07:17 PM
http://i230.photobucket.com/albums/ee285/studeq/newsgroup/DSCF2309best.jpg?t=1266365283

Pleased to report that the Bonneville poster reprint came out quite well. I can provide them in these three sizes (see image above for comparison).

12 X 18 $10 plus $4.00 postage
24 X 36 $14 plus $5.50 priority mail
36 X 48 $20 plus $5.50 priority mail

Cash, check, money order or PayPal accepted. Contact me directly for any further information (rtq11 at aol.com)

If you compare the posters above with the original at the head of this thread you will note they are identical with the exception of the Avanti that I substituted in the third photo for the convertible. I could not get a very good image of the convertible and besides I preferred the image of the Duo Cento with the chute deployed. I can provide a copy with the convertible if anyone would like it.


Richard Quinn
Editor emeritus: Antique Studebaker Review

Studebaker Wheel
02-16-2010, 07:42 PM
I should have mentioned that I will not be attending York this year so cannot make any deliveries there. I do plan to be in South Bend for the May swap meet so if any one is interested I can deliver there and save you the postage so long as the order is placed and paid for at least a week prior to the meet.

Richard Quinn
Editor emeritus: Antique Studebaker Review

Avantidon
02-17-2010, 09:46 AM
Richard, I'll send check to you today for 36" x 48" poster. Thanks for the effort you have put into this project!! Sorry you won't be in York as I'll miss spending time with you.

hi-peral
02-17-2010, 01:25 PM
Richard...You have mail.

Al

Live your dreams!

Studebaker Wheel
03-17-2011, 01:52 AM
For anyone who may have an interest I have listed one on Ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310304358771

Bob Andrews
03-17-2011, 05:59 AM
I would be interested but would want one the original size. I think the size of the picture makes it way more interesting.

Agree completely. If you ever do a full-size I'd take one as well.

barnlark
03-17-2011, 08:20 AM
For anyone who may have an interest I have listed one on Ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310304358771

Are you out of the 4'X3' versions mentioned in 2010? That size is pretty close to the original size and plenty big enough for my garage wall...well, if I ever get around to mudding up the drywall. I imagine the odd extra 7" long and 6" wide of the original would be pretty tough to duplicate and also not a common shipping tube size.

lark63
03-17-2011, 10:31 AM
I have to admit Dick, I think your attic would be a very cool place to be digging around!!!!!!!!!! If you ever need any help digging, give me a call!

Studebaker Wheel
03-17-2011, 02:23 PM
Are you out of the 4'X3' versions mentioned in 2010? That size is pretty close to the original size and plenty big enough for my garage wall...well, if I ever get around to mudding up the drywall. I imagine the odd extra 7" long and 6" wide of the original would be pretty tough to duplicate and also not a common shipping tube size.

http://i230.photobucket.com/albums/ee285/studeq/newsgroup/posterbonnevilleprforum.jpg?t=1300385874

I am in the process of having some large posters done at a local printing place so I could do another few 3 X 4' Bonneville posters if anyone wants one. Actually I have done two of these, they are identical except for the 3rd photo (see images above). The original had the Daytona convertible but an Avanti guy wanted one showing the Duo Cento so I made one special for him. I can do either so email me at rtq11@aol.com if interested.

jts359
03-17-2011, 04:20 PM
I remember seeing that in the Ray & Bill Studebaker Dealer in East Hanover N.J. My Dad was buying a used 61 Chevy from them , Ed

LarkTruck
04-03-2011, 08:11 AM
Received my copy of the original poster this past week-NICE! AWESOME addition to any Studemania collection from an AWESOME Studebaker Historian.
Thanks Richard.
Jim S.

Studebaker Wheel
04-03-2011, 02:42 PM
Thanks Jim for the unsolicited testimonial!!

Honest I didn't put him up to it!

Still have a few left in the 3 sizes.

go-studebaker
04-03-2011, 04:20 PM
Hi Richard,
oddly enough, I think I have one of those somewhere, but have not seen it in years. It came from Des Skinner in Queensland.

Regards
Greg