I own a 1962 2 dr lark 6 cyl. I have acquired a set of rear quarters for it. After looking closely I see that there are two holes, one above the other and appx. 4 1/2" apart, in the new set that are not present in the originals still on the car. These two holes are just below and forward of the back up lite openings and above the top of where the bumper would be. The top hole is appx. 1/2" dia. and the lower is 5/8" dia. Anyone have an idea of what these fenders are off of and/or what these holes were used for? Thanks in advance for any info.
-
-
They are probably from the filler blocks used on 64-66 cars.
Milt
1947 Champion
1961 Hawk
1964 Convertable
1967 Avanti
Milt
1947 Champion (owned since 1967)
1961 Hawk 4-speed
1967 Avanti
1961 Lark 2 door
1988 Avanti Convertible
Member of SDC since 1973 -
I used a set of those on my 63 convert and they work fine you just have to weld the holes shut. there are no more 62- 63 fenders left at SASCO so this is what they ship.And yes they are 65-66 quarters as was indicated in previous post.Frank van Doorn
Omaha, Ne.
1962 GT Hawk 289 4 speed
1941 Champion streetrod, R-2 Powered, GM 200-4R trans.
1952 V-8 232 Commander State "Starliner" hardtop ODComment
Comment