I'm installing/restoring the exterior trim on my Champion and have all of it but the pot metal pieces are in sad shape. I'm contemplating on buying kits to restore the pieces myself OR buying some very good cores from you folks here. Most of the parts have legible part numbers if you need them. I've researched quite a bit on the net on restoring pot metal and it can be done at home, but alot of prep needs to be done by the letter.
If you have any of these parts that are in good shape, minimal to no pot marks please contact me. My bumpers will definitely be outsourced.
Any help would be greatly appreciated. Below are photos of pieces I need to replate or replace. Thanks in advance. -robert
Trunk handle base and light cover. Front hood nose pieces.
Hood scripts, Colorbelt end pieces.
Headlight rings
1941 Champion 3G Coupe
"Life's too short.. Eat your cake first"
Robert Kidwell - Pleasant View, Tennessee 37146
Proud new member of the SDC
My Stude Project
If you have any of these parts that are in good shape, minimal to no pot marks please contact me. My bumpers will definitely be outsourced.
Any help would be greatly appreciated. Below are photos of pieces I need to replate or replace. Thanks in advance. -robert
Trunk handle base and light cover. Front hood nose pieces.
Hood scripts, Colorbelt end pieces.
Headlight rings
1941 Champion 3G Coupe
"Life's too short.. Eat your cake first"
Robert Kidwell - Pleasant View, Tennessee 37146
Proud new member of the SDC
My Stude Project