Announcement

Collapse
No announcement yet.

Long tie rod availability..?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Long tie rod availability..?

    For my 63 Lark sedan, I was hoping there might be another vehicle or brand that used the 19 and 7/8" long shaft ends and someone might have been there before me. Thanks!

    Western Washington, USA

  • #2
    Tom, Take a piece of 7/8" OD X 5/8" ID steel tube and set a pair of Ford tie rod ends in the tapered holes. Measure half the threaded part of the tie rods and cut the tube and tap 11/16" X 18 Right and Left on the ends.

    Comment

    Working...
    X