61 hawk horn

[studelover]

I was tighten up my steering wheel today and noticed that my horn will not blow if I press the horn ring, however when I was tighten up the steering wheel everytime the wrench touched the connector that the wire goes into the horns blew. When I take the center plastic part off you can see my horn insides could there be something missing as the horn will not blow the normal way only when I touch the connector with something metal.

Studebakers forever!

[Tom Bredehoft]

Check for corrosion around the outside of the steel cup, both on the cup and the plate below. Steel wool them both then apply a thin coat of Vaseline.

[img=left]http://www.alink.com/personal/tbredehoft/Avatar1.jpg[/img=left]
Tom Bredehoft
'53 Commander Coupe (since 1959)
'55 President (6H Y6) State Sedan
(Under Construction 494 hrs.)
'05 Legacy Ltd Wagon
All Indiana built cars