Announcement

Collapse
No announcement yet.

P/S ram bracket location

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • P/S ram bracket location

    Hello -
    I'm very new here, but was raised on Studebakers, and have had a few of my own. Currently, I'm adding PS to a manual steering 1960 Hawk. I've bought all the components, but I cannot tell where to mount the ram bracket on the frame. There are no holes, or other position that looks obvious. I searched the archives, and could not find anything on this. The parts and service books don't really show the location too well either. Can someone take a close-up picture of the mounted bracket, so I can see where and how to mount it?
    Thanks a bunch!

    Minden, Nevada

    1950 2R5 truck
    1960 Hawk R1 4 speed project
    Steve
    Buckeye, Arizona

    1960 Hawk R2 4 speed project

  • #2
    here ya go...



    Ray


    Specializing in Studebaker Restoration
    Ray

    www.raylinrestoration.com
    Specializing in Studebaker Restoration

    Comment


    • #3
      Those holes are 9 inches back from the front end of the frame horn. The installation instructions shows the location of three more smaller holes to be drilled for hose clips.


      Dwain G.
      Restorations by Skip Towne

      Comment


      • #4
        Thanks a bunch! I'll get this mounted over the weekend.

        Minden, Nevada

        1950 2R5 truck
        1960 Hawk R1 4 speed project
        Steve
        Buckeye, Arizona

        1960 Hawk R2 4 speed project

        Comment

        Working...
        X