Offer to create CD for TurboStude's mint Avanti

[63Avanti]

Offer to create CD for TurboStude's mint Avanti

I offer my services, free to create an HTML accessible CD
of the photos of the mint Avanti. My proposal is to put it into
HTML paging and links, with the organization the same as the original Avanti parts manual, section by section. Once Done, I will deliver 10 CDROMS, all free of charge, with copyright to Turbostude on all pages.

Some of my work can be seen at http://systems-engineering-associates.com/avocation



Terry, North Texas
1963 Avanti R2, 63SR1065
(in stage 1 resto "Project A")

http://sterkel.org/avanti

1985 Kubota L2202(Diesel)
1999 Toyota rice burner
1986 Ford 150 Long Bed

New resolution.
I will continue to respond, to the best of my ability, to any query,
challenge or alternative view relevant to my original post.
I will not respond to anything off (the original) topic...

[63Avanti]

any updates on this offer, or is it available soon through other means?


Terry, North Texas
1963 Avanti R2, 63SR1065
(in stage 1 resto "Project A")

http://sterkel.org/avanti

1985 Kubota L2202(Diesel)
1999 Toyota rice burner
1986 Ford 150 Long Bed

New resolution.
I will continue to respond, to the best of my ability, to any query,
challenge or alternative view relevant to my original post.
I will not respond to anything off (the original) topic...

[jlmccuan]

Since I have reasonably good access to that car, I have taken another 4-500 pictures, both before and after I detail a section. The engine bay was stripped down to the shortblock and was documented as it came apart, as those pieces were detailed, and more pictures as it went back together.

Jim

_________1966 Avanti II RQA 0088______________________1963 Avanti R2 63R3152_______________Rabid Snail Racing

[grobb284]

Jim,
Are you going to make these accessible through the internet?


1963 Studebaker Avanti: C4 Corvette narrowed front/rear suspension, C5 13" calipers/rotors adapted to C4, Viper differential with Intrax 3.54 ratio (the snake has been charmed!), coil overs, stainless tubular frame, stainless chambered side exhaust.
Here are two links for some pictures and information.
Slide Show
Magazine Article

[jlmccuan]

There are several pictures on the Photobucket site, albeit at reduced resolution. I'll be glad to share the full res files

The advantage of Terry's format is to be able to use the factory parts and shop manuals' structure and format and simply go to the CD for additional pictures of the same parts.

Terry, I also have the pictures by TurboStude, but Greg did want to retain copyrights to them. My understanding is that they document the car for it's future owners, but are not publishable without Greg's permission.

I would also be open to you having access to the car for documentation and pictures. We even have a place for you to stay, if you like.

Jim

_________1966 Avanti II RQA 0088______________________1963 Avanti R2 63R3152_______________Rabid Snail Racing

[turbostude]

I was going to put a similar CD together.
I would consider releasing the pics, but had in mind charging some reasonable amount for each CD sold,most of which would be donated to the Stude Museum. Enough held back to pay for more CD's to be produced. This would be another simple opportunity for the drivers club to help preserve our heritage.....


Greg

http://Salt2Salt.com

http://Turbostude.com

http://turbostude.com/Tribaker (LP three-wheeler project)