Who do you think might have a used round headlight front clip for a 1963 Avanti? I am going to try Jon Myer but was wondering if anyone had any other ideas or that they might have one that they would be willing to sell. Someone who owned my car previously changed it over to a square bezel and this is an earlier car with no rain gutters. Whatever happened to Jim Heiple's parts after his unfortunate circumstance?
Announcement
Collapse
No announcement yet.
1963 Avanti front clip
Collapse
X
-
Used front panels are going to be very hard to find, especially since they are not easily removable, and must be "cut" out! I would go with a new one from Studebaker International or Nostalgic Avanti.
StudeRich
Studebakers Northwest
Ferndale, WAStudeRich
Second Generation Stude Driver,
Proud '54 Starliner Owner
SDC Member Since 1967
-
I haven't had the need for any body parts, but they're out there?
Good to know...
Hopefully the new owner of the one I saw for sale will get a new front piece.
A previous owner...a long time ago..cut a hole above the bumper and installed a Porsche 356 rear deck grille in it.
Not a complementary look...IMHO.
I've never heard that they ran that hot that additional grilles were needed.
63 Avanti R1 2788
1914 Stutz Bearcat
(George Barris replica)
Washington State63 Avanti R1 2788
1914 Stutz Bearcat
(George Barris replica)
Washington State
Comment
-
Haven't seen a round headlight front clip for some time. As Rich suggests you can buy replacement panels that are quite good. Have used several pieces of these in the last year on a project car and they work well.sigpicSee you in the future as I write about our past
Comment
-
I only wanted to go used so that I would be sure to get all the associated parts that would be needed as easily as possible. I have seen a few cars that people have had that were fire damaged or parted out but this was before I needed a front clip. As far as installing used fiberglass parts compared to new ones, I don't have any experience myself, but I find it hard to imagine that a good body shop would have any trouble doing it since the body is made up of so many pieces to start with that needed to be joined. I do know that Jim Heiple had an Avanti sitting in his yard and that is why I asked what happened to his parts.
Comment
-
Might check with Lee DeLaBarre in Ft Wayne, He had some Avanti's he was parting out.
Jim"We can't all be Heroes, Some us just need to stand on the curb and clap as they go by" Will Rogers
We will provide the curb for you to stand on and clap!
Indy Honor Flight www.IndyHonorFlight.org
As of Veterans Day 2017, IHF has flown 2,450 WWII, Korean, and Vietnam Veterans to Washington DC at NO charge! to see their Memorials!
Comment
-
Jim passed away last year but his wife and sons are selling parts. You may want to call them and ask. They were at York last month and in Reedsville last November. They are in bedford, PA.sigpicSee you in the future as I write about our past
Comment
-
I appreciate the lead on Lee DeLaBarre, but he posted a thread about selling parts in the past and when I asked about a clip he returned that all of his Avantis have square bezels. Avantidon, are you telling me that Jim's family moved? He was in Somerset, PA.
Comment
-
I appreciate the lead on Lee DeLaBarre, but he posted a thread about selling parts in the past and when I asked about a clip he returned that all of his Avantis have square bezels. Avantidon, are you telling me that Jim's family moved? He was in Somerset, PA.
Comment
-
No that's my fault. They are still in the same place in Somerset. When you drive the turnpike it's all the same in that area and only about 30 miles apart. Sorry for the confusion.sigpicSee you in the future as I write about our past
Comment
-
No that's my fault. They are still in the same place in Somerset. When you drive the turnpike it's all the same in that area and only about 30 miles apart. Sorry for the confusion.sigpicSee you in the future as I write about our past
Comment
-
Go on page 79 of the Studebaker Intrnational parts catalog. A front nose panel with round headlights for 349.95.. You can go to their website www.studebaker-intl.com and check the online catalog there.
New Jersey & Studes Perfect Together
Comment
-
Go on page 79 of the Studebaker Intrnational parts catalog. A front nose panel with round headlights for 349.95.. You can go to their website www.studebaker-intl.com and check the online catalog there.
New Jersey & Studes Perfect Together
Comment
Comment