PDA

View Full Version : Electrical: Temp gauge connections



BShaw
06-24-2018, 12:46 PM
Some time back I had my temp gauge out and when I reinstalled it I could not get it to work. As a workaround I put an aftermarket gauge under the dash until I could get around to sleuthing the original gauge. Well, that day has come. I’ve removed the front seat so I can get under the dash and removed the temp gauge. Before I go further I’d like to ask the experts if my connections are correct. The wiring diagram doesn’t indicate wiring color but I have an orange coming from the sender and a white w/black stripe from the accessory side of the ign switch. See the photo for reference. Thanks in advance.
73414

BShaw
06-24-2018, 05:10 PM
Solved! For others, the connections in my photo are correct (Thanks Brad Bez). Clean connections and a good ground and my original temp gauge is working fine again..

jrlemke
06-24-2018, 08:42 PM
Thanks, this is was what I was asking about last week! One question, was there more than one wire connected to the 12v post? -Jim