PDA

View Full Version : Nos side trim/molding??? Need help



jclary
09-02-2017, 06:06 PM
I have spent the day getting parts ready for a meet. I have discovered a couple of side moldings in original paper sleeves. The part # is 1321002. I don't see that listed in the SI Ccatalog..Since these parts were found with '63/64 parts, I suspect they fit those years. I don't have a parts manual that new. Any body able to help identify? Thanks.

r1lark
09-02-2017, 06:21 PM
John, '64 would probably be in the 136xxxx range. Found this on a Google search at Steven Allens:. P/n 1321002 Front fender: All 1957 sedans & wagons except Packard (2 per car)

StudeRich
09-02-2017, 06:21 PM
John 1321002 is not in the '59-'64 Body Parts Catalog Part Number Index/listing. If you measured it's Length we could tell if it is Front Fender, 2 Door or 4 Door Front Door, Rear Door or 2 or 4 Door Rear Fender.

I suspect it is (or was) a Moulding Kit with fasteners.

Can you tell if it is the Wider Aluminum '64-'66 Daytona/Cruiser Type with either 2 narrow Black Stripes or one wider Center Black stripe, OR just a Stainless narrower Type for a '64 Commander (Flat) or even the curved top to bottom '63 Type?

58L-J8 Guy
09-02-2017, 06:24 PM
I have spent the day getting parts ready for a meet. I have discovered a couple of side moldings in original paper sleeves. The part # is 1321002. I don't see that listed in the SI Ccatalog..Since these parts were found with '63/64 parts, I suspect they fit those years. I don't have a parts manual that new. Any body able to help identify? Thanks.
Hi John,
The mldgs you have are listed in the S.I. catalog, page 134, and are front fender side mldgs that fit either side of all 57 Studes except Hawks. Hope this helps.
Dave

jclary
09-02-2017, 08:31 PM
Hi John,
The mldgs you have are listed in the S.I. catalog, page 134, and are front fender side mldgs that fit either side of all 57 Studes except Hawks. Hope this helps.
Dave

Thanks a lot Dave!:!: Apparently, I did not look in the right place in the catalog.:rolleyes: I'm gonna blame it on fatigue.:yeahright:

So, '57 Studebaker it is ('cept Hawks). That means I have a set of the front fender moldings. If I remember to bring them, they will be offered at the Tri-State meet in Maggie Valley NC. If you pick them up there, the shipping is awfully cheap!;)

raoul5788
09-02-2017, 08:36 PM
Thanks a lot Dave!:!: Apparently, I did not look in the right place in the catalog.:rolleyes: I'm gonna blame it on fatigue.:yeahright:

So, '57 Studebaker & Packard it is ('cept Hawks). That means I have a set of the front fender moldings. If I remember to bring them, they will be offered at the Tri-State meet in Maggie Valley NC. If you pick them up there, the shipping is awfully cheap!;)

Not the '57 Packards. The moldings are different on them. Check my avatar, it's my '57 Packard wagon. The side moldings are much wider than on the Studebakers.

StudeRich
09-02-2017, 08:37 PM
NO, NOT Packard per post #2. :ohmy:

Time for Bed Johnny!!! :D

jclary
09-02-2017, 08:45 PM
NO, NOT Packard per post #2. :ohmy:

Time for Bed Johnny!!! :D

:oops::oYou are so right! I went back & edited my post.:o:o And, yeah...I'm still fatigued.:(

r1lark
09-03-2017, 04:52 AM
John, your new 'signature' picture of your truck...............maybe it's my computer doing it, but instead of green the truck looks blue. Actually a very nice looking blue :).

jclary
09-03-2017, 07:04 AM
I can assure you it is not your computer.:) Nor is it the actual color. The pic was taken by my wife's cousin. I had driven over to their house to pick up a bag of grain her husband had mistakenly bought for a wildlife feeder.

Somehow, he claimed it was not what he wanted, and gave it to me for my chickens & goats. Her cousin took the pics, & her husband monkeyed with the pics before sending them to us. I'll keep this one up for awhile & change it later.;)