PDA

View Full Version : Pics of Evans intake installation ( Video tomorrow )



shifter4
03-31-2017, 08:25 PM
Today , I installed the intake , and did fire it up , but no video today , because of stout winds here .
The tilt front on my car is a little too shaky to move the car outside in the winds which were 30mph today
in gusts , and coming straight up the driveway .
I'm planning to run the car on April 9th .
This intake is in replacement of my Morgan QuaDemon aluminum one , and there are side by side pics to
compare , and also to compare to a Jeff Rice 2BBl to 4BBl conversion .

Their's more pics on my Flickr site here at this link :

https://www.flickr.com/photos/hollyhillbill289/


https://c1.staticflickr.com/3/2846/33763936075_84149209f9_b.jpg (https://flic.kr/p/TrAZST)Evans on Skeet 2 (https://flic.kr/p/TrAZST) by Bill H (https://www.flickr.com/photos/hollyhillbill289/), on Flickr


https://c1.staticflickr.com/4/3927/32950820463_33a09b2f2b_b.jpg (https://flic.kr/p/ScKyWc)Evans : Morgan 1 (https://flic.kr/p/ScKyWc) by Bill H (https://www.flickr.com/photos/hollyhillbill289/), on Flickr

https://c1.staticflickr.com/4/3698/33722824736_2b79ea6c10_b.jpg (https://flic.kr/p/TnYhUG)Evans Skeet 3 (https://flic.kr/p/TnYhUG) by Bill H (https://www.flickr.com/photos/hollyhillbill289/), on Flickr

spokejr
03-31-2017, 10:29 PM
What's your plans for the old manifold?

bumpkinvilledano
04-01-2017, 02:56 AM
I wish you luck with the air filter.

I had a bad experience with one on a brand X several years ago(was on the vehicle when I bought it). Poor fit allowed unfiltered air into the engine, and one of the retainers came loose and hung up the throttle linkage (pucker factor went to 11 that time).:eek:

Personally, I would duct tape a sock to the carb before I would use one of them again.:(

JRoberts
04-01-2017, 08:21 AM
I wish you luck with the air filter.

I had a bad experience with one on a brand X several years ago(was on the vehicle when I bought it). Poor fit allowed unfiltered air into the engine, and one of the retainers came loose and hung up the throttle linkage (pucker factor went to 11 that time).:eek:

Personally, I would duct tape a sock to the carb before I would use one of them again.:(
Several years ago a friend of mine was using that kind of air filter and it caught fire bubbling up the new paint on his beautiful '55 coupe's hood. I have heard of that happening when using that filter on other cars as well. They look neat, but......

The manifold looks great by the way.